p361-362 HYD10 Insulation Piercing Connectors(10KV)
1. The conductor used for insulation piercing connector must conform with international standard.
2. The installation operator must be familiar with installation technique.
3. Please put on insulating gloves and use insulating box spanner during hot-line work.
4. The insulation piercing connector is a kind of one-time product. Please do not use it again after dismantling because of dental pattern transfiguration.
1.Installing and fixing main cable in traditional way.
2. Stripping outer insulator of main cable for 0.6m at part that need part(don,t destroy insulaton layer for phase).
3.Choosing branch cable ( not more than 3m) whose distance is the same as electric meter
box, and strip insulator at two terminals.
4.Installing the separator vertically by turns (the epatator distance is more than 10cm).
Special for street lamp system (vertical shaft forbidden)
■For connecting the building lights, street lamp, high building vertical shaft
■For connecting the cables of high building vertical shaft, outdoors overhead wire, cable trench, factory power cable.