(400A) din-rail type Three phase four wire large current multi-channel output measuring box special junction box
This product supports metering of various meter-position, after mounting, it not only avoids the problem of weak current, unsafe, inconvenience or other potential accidents caused by service-entrance wire entering into bare copper bar directly, but also cuts down the cost of metering box. It can be divided into single-pole (1P), single-phase (2P), three-phase three-wire (3P), three-phase four-wire (4P) according to the pole number; it can be divided into one-outlet, two-outlet, three-outlet, four-outlet … eighteen-outlet and so on according to the outlet wire condition.
Main technical indexes
1. Insulation voltage: 660V 50HZ(60HZ)
2. Service-entrance conductor current:250A、300A、400A
3. Meter-entrance conductor current(A/section mm2): 60A/16mm2（wire outgoing at each
4.Working temp.: -40℃～+160℃
Installation and operation
This series of products provide two installation modes:
One:Fixed type,drill hole in the base plate and install directly,mounting screw is M5.
Two:Rail type,installed on the TH-35 guide rail (top hat rail).
|Main technical parameter|
|Service-entrance conductor current (A/section mm2||100/25, 150/50, 250/120 ,300/150 400/240|
|Meter-entrance conductor current(A/section mm2||60-125/10-25（wire outgoing at eachcircuit）|
|Power frequency withstand voltage:||3,000V/1min|